PERENCANAAN DAN KALIBRASIBATANGPELURUS BERDASARKANSTANDARJISB7514
DOI:
https://doi.org/10.30606/aptk.v6i2.100Keywords:
Metrology, clibration, straight edge, accuracy, tolerence.Abstract
In the measurement process on a machine tool alignment required an alignment as the reference standard.In this case the rod straightener is a measurement tool that is commonly used in metrology laboratories. Inplanning and the alignment rod calibration followed standard JIS B7514, which is described in the standardspecification of the alignment rod which include dimensions, quality and tolerance limits. From the results ofthe calibration are performed on the alignment rod has a classification according to JIS B7514 standardclass (grade) B. Thus the alignment rod can only be used for testing machine tools with high level ofaccuracy that is not high (conventional).References
Bagiasna, Komang, Dr. Ir, ”Pengantar Pengujian
Ketelitian Geometrik Mesin Perkakas”,
Laboratorium Metrologi Indsutri, Institut
Teknologi Bandung.
Beers, J.S., "Length Scale Measurement
Procedures at the National Bureau of
Standards," NBSIR 87-3625, 1987.
D.M. Anthony, Engineering Metrology,
Peragamon Press, New York, N.Y. (1986)
Rochim, Taufik, dan Sri Hardjoko, ”Spesifikasi
Geometris, Metrologi Industri dan Kontrol
Kualitas”, Laboratorium Metrologi Industri,
Institut Teknologi Bandung, April 1985.
