PENERAPAN RCM DENGAN ANALISA KUALITATIF ( FMEA ) SEBAGAI STUDI KEGAGALAN SISTEM PEMBANGKIT (GENSET) PADA SEBUAH HOTEL BINTANG EMPAT DI ROKAN HULU

Authors

  • Ahmad Fathoni, Legisnal Hakim Program Studi Teknik Mesin Fakultas Teknik Universitas Pasir Pengaraian

DOI:

https://doi.org/10.30606/aptk.v11i1.1661

Keywords:

FMEA, Cummins NTA 855 A.

Abstract

When the electricity supply from PLN dies at a Hotel or PLN electricity in a Regency is not able to distribute to Hotels, then the Hotel is obliged to provide its own electricity supply by using a generator driven by a diesel motor. Diesel motors are internal combustion motors which are also called Compression Ignition Motors ("Compression-Ignition engines"). Diesel motors as drive generators used at Sapadia Hotels Type Cummins NTA 855 A. Diesel motors are very susceptible to malfunction, where many causes of malfunction are caused by human errors, age factors, maintenance systems, and operation of tools. The cause of the failure was also due to a lack of management planning to make a strategic plan for the treatment program. It needs to be applied reliability-based treatment method (RCM) with qualitative analysis with steps as follows: Determination of engine characteristics, System Functional Separation Diagram, Developing System Block Diagrams, Establishing Functions and Functional Failures, Making a List of Functions and Functional Failure, Implementation / Guidance on Failure Modes Effect Analysis (FMEA), failures often occur in diesel engines and cause down performance or diesel engines to be damaged because the sub-systems in diesel engines are not well maintained. Which is very influential on the performance of generator engines are injection pumps and injectors, pistons, piston rings and linear cylinders.

References

ABS Guidance Notes On Reliability-Centered Maintenance. 2004 American Bureau of Shipping ABS Plaza 16855 Northchase Drive Houston, TX 77060 USA

A.R. Ismail, R. Ismail, R. Zulkifli, N. K. Makhtar, B. M. Deros, 2009, “A Study on Implementation of Preventive Maintenance Programme at Malaysia Palm Oil Mill “, European Journal of Scientific Research.ISSN 1450-216X Vol.29 No.1

Difana Meilani, Insannul Kamil, dan Arie Satria, Oktober 2008,” Analisis Reliability Centered Maintenance (RCM) Dan Reliability Centered Spares (RCS) Pada Unit Rawmill Pabrik Indarung IV PT. Semen Padang”, Jurnal Optmasi Sistem Industri, Vol 8 No1, Teknik Industri Universitas Andalas (UNAND)

Irriene Indah Susanti, 2009,” Penerapan Analisis Mode Kegagalan dan Dampak (FMEA) pada infrastruktur Bandar Udara”, tesis,ITB.

Mohammad Tahril Azis, M. Salman Suprawhardana Dan Teguh Pudji Purwanto, November 2009, “Penerapan Metode Reliability Centered Maintenance (RCM) Berbasis Web Pada Sistem Pendingin Primer Di Reaktor Serba Guna GA. Siwabessy”,Seminar Nasional V, SDM Teknologi Nuklir, Yogyakarta, ISSN1978-0176.

NASA, 2008, “ Reliability Centered Maintenance for Facilities and Collateral Equipment”. National Aeronautics And Space Administration, Washington DC, final September.

Downloads

Published

2018-12-08