PERENCANAAN APLIKASI RCM DENGAN ANALISA KUALITATIF PADA STASIUN PENGOLAHAN BIJI SAWIT
DOI:
https://doi.org/10.30606/aptk.v3i2.46Keywords:
RCM, qualitative analysis, Screw press/pressingAbstract
In this globalization, companies are have to increase productivity in order to produce maximum output. In this case, especially system productivity company. Smoothness system or production process is supported by many aspects, one of which is the aspect of reliability of existing machinery or equipment in the production system.In palm oil mills, there are two processing stations and processing of palm fruit processing palm kernel. Palm kernel oil processing systems, among others, Pressing, Nut fiber, Depricarper, Polishing drum, cyclone Nut, Nut hoper, Ripple mill, LTDS 1 & 2, Claybath. To increase the productivity of these systems need to be an appropriate activity treatment on the machine or equipment, in an effort to increase conduction reliability of the equipment in the system kernel oil processing. For it is necessary for treatment planning method RCM (Reliability Centered Maintenance) using qualitative analysis where the RCM method can determine the identification of critical equipment and components, optimum care, treatment and consequences of activity intervals failures in machinery or equipment or core processing system palm on palm oil mills company.References
DWI PRIYATNA, Keandalan dan Perawatan, Jurusan Teknik Sistem Perkapalan, Fakultas Teknolgi Kelautan, Institut Teknologi Sepuluh Nopember Surabaya (2000)
DJUNAIDI, Pemeliharaan Tube-Side Penukar Kalor RSG-GAS jangka pendek dan jangka panjang, Seminar Nasional III, SDM Teknologi Nuklir, 21-22November 2007,ISSN 1978-0176.
HENLEY,E.J dan H. KUMAMOTO, Reliability Engineering and Risk Assesment, New Jersey: Prentice Hall (1981)
IAEA-TEC DOC 658, Safety related maintenance in the framework of the reliability centered maintenance concept, Vienna: IAEA (1992)IAEA- TECDOC 1590, Aplication of Reliability Maintenance to Optimize Operation and Maintenance in Nuclear Power Plant, Vienna: IAEA (2007).
JOHN MOUBRAY, Reliability Centered Maintenance, Second Edition, Industrial Press Inc, (1992)
MARVIN RAUSAND, Reliability Centered Maintenance, Department of Production and Quality Engineering, Nurwegian University Science and Technology.1998
M. WAZIZ WILDAN, Handout Mata Kuliah SistemPerawatan, Reliability Centered Maintenance(RCM), Jurusan Teknik Mesin dan Industri,Fakultas Teknik UGM, 2009
M. SALMAN SUPRAWHARDANA, SUPRIYONO, Uji Mutu Pompa Daya160KW Menggunakan Analisis Reliabilitas, Laporan Teknis Berkala MIPA Vol. 9 No.1Maret 2001
MOHAMMAD TAHRIL AZIS, M. SALMAN SUPRAWHARDANA DAN TEGUH PUDJIPURWANTO, 2009,
“Penerapan Metode Reliability Centered Maintenance (Rcm) Berbasis Web Pada Sistem Pendingin Primer Di Reaktor Serba Guna GA. Siwabessy “,Seminar Nasional VSdm Teknologi NuklirYogyakarta, 5 November 2009 Issn 1978-0176
SANTOSA PUJIARTA dan BAMBANG CONYIRAWAN, Pemeliharaan Sistem Pendingin Primer JE-01 di reaktor GA. Siwabessy. Seminar Nasional IV, SDM TeknologiNuklir, 25-26 Agustus 2008. ISSN 1978-0176.
V.S. DEPHANDE and JP MODAK, Applica tion ofRCM to Medium Scale Industry, Departmentof Mechanical Engineering, P.C.E. & A,Nagpur University, Mahara shanta, India.2001
YAYAN ANDRIYANTO dan DJUNAIDI, Evaluasi Perawatan Katup-katup Otomatis pada Sistem Instalasi di Reaktor Serba Guna GA. Siwabessy. Seminar Nasional IV, SDMTeknologi Nuklir, 25-26 Agustus 2008. ISSN1978-0176.
